FOR YOUR CLASSROOM

Classroom Cam

 Open receiver

Support

Let’s get you connected.

Classroom Cam works best when the iPhone and computer are connected to the same ordinary Wi-Fi network.

Set up a camera

  1. Connect the iPhone and computer to the same Wi-Fi network.
  2. Open classroomcam.noahmoberg.com on the computer.
  3. Open Classroom Cam on the iPhone and tap Scan browser code.
  4. Allow camera access, then scan the private QR code shown in the browser.

If camera permission was denied

Open the iPhone’s Settings app, choose Apps → Classroom Cam, enable Camera, then return to Classroom Cam and scan again.

If the devices do not connect

  • Confirm both devices are on the same Wi-Fi network, not one on Wi-Fi and one on cellular.
  • Avoid guest networks. School and enterprise Wi-Fi may use client isolation, which prevents devices on the same network from communicating directly.
  • Turn off a VPN or restrictive firewall temporarily and try again.
  • Close the old browser tab, reopen the receiver, and scan the new code.
  • Make sure the QR code has not expired; unused codes expire after ten minutes.
Network limitationClassroom Cam does not use a relay server. Networks that block peer-to-peer or UDP traffic may not be compatible.

Still need help?

Email noahmoberg424@yahoo.com with the iPhone model, iOS version, browser, and the message shown on screen. Do not send pairing codes or session credentials.